Super Foam Operator

Job Details

Description

Essential Job Function

Uses production schedule to determine material to be cut.

Operate CTW Machine.

Operate/cycle punch press.

Uses a manual pump lift table to obtain and transport rolls from roll storage area to load onto roll stand.

Measures length of material ordered and initiates cuts; trimming all sides necessary.

Packages material according to established specifications.

Retains all scrap material to be weighed and recorded.

Inspects all sides and corners for correct cuts.

Installs product tag.

Continuously monitors the quality of the material to ensure that it meets quality standards.

Assists in maintaining department in accordance with good housekeeping practices.

Observes all safety and environmental procedures.

Performs other duties as requested by supervision.

Job Qualifications

Ability to read, write, and perform basic math.

Ability to work with little or no supervision, given proper instructions.

Ability to read and use a tape measure to 1/16th of an inch.

Ability to operate foot pump lift table.

Ability to competently operate personal computer terminal.

High School diploma or equivalent required.

Physical Demands

Rarely (0% to 33%)

Occasionally (34% to 66%)

Frequently (67% to 100%)

Rarely pushes, sits, reclines, squats, kneels, twists, climbs, balances, crawls, or reaches above the shoulder. Occasionally lifts up to 70 pounds, carries up to 70 pounds, pulls with one or both hands, reaches horizontally, and reaches below the waist. Frequently walks and stands.

Working Conditions

Rarely (0% to 33%)

Occasionally (34% to 66%)

Frequently (67% to 100%)

Rarely deals with the outside, low humidity, wetness, slippery surfaces, vibration, confined space, high elevation, noise, chemical irritant, oil, odors, explosives, electrical hazards and toxic conditions. Occasionally deals with high temperature, high humidity and low temperature. Frequently deals with the inside, and moving objects.

Equipment Used

This job uses utility knife, CTW machine, punch press, tape measure, tape gun, tag gun, air stapler, calculator, and computer.

Qualifications

Skills

Behaviors

:

Motivations

:

Education

Experience

Licenses & Certifications